Retaining Cap 2 Standoffs + Swirl Ring for PT-80 PT80 iPT80 IPT-80 Plasma Torch

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

PlasmaDyn© Plasma Cutter Replacement Parts Your US Based Expert in Plasma Cutters and Equipment for over 10 Years 　 Tecmo® PT-80 (iPT-80) Plasma Torch These parts are made in by Tecmo® Includes: 1 x PT-80 Retaining Cap MT60510 (#7) 1 x PT-80 Swirl Ring MT60027 (#4) 2 x PT-80 Standoffs MT604342 (#8) For our OTHER iPT80 Parts CLICK THIS LINK!! Fits TECMO® PT-80 (iPt-80) Plasma Torches used on LONGEVITY® 62i, EVERLAST® 60S, PowerPlasma 70S, PowerCut 80s, HTP®, AHP® AND OTHER PLASMA CUTTERS WITH PT-80/iPT TORCH SYSTEM Note: these shielded parts should be used with 60511 (#11) & 60504 (#12) - see below We stock most PT-80 parts listed below - and ship same day - contact us for details Item # Part Number - Description 1 09800.42 - Cooling Tube 3 52558 - Electrode 4 60027 - Swirl ring 5 51310.09 - Contact Cutting, ø 0.9, 30-40A 6 51310.09 - Cutting, ø 1.0, 40-50A 51311.11 - Cutting, ø 1.1, 50-60A 51311.12 - Cutting, ø 1.2, 60-70A 51311.13 - Cutting, ø 1.3, 70-80A 7 60510 - Retaining Cap 8 60434 - Double Pointed Spacer (item 6 only) 9 51311S.10 - Contact Tip, ø 1.0, 40-50A 51311S.11 - Tip, ø 1.1, 50-60A 51311S.12 - Tip, ø 1.2, 60-70A 51311S.13 - Tip, ø 1.3, 70-80A 10 51311G.16 - Tip, Gouging, 80A 11 60511 - Shield Cup Body 12 60504 - Shield Cap, Hand 13 60508 - Shield Cap, Gouging 14 52558L - Extended Electrode 15 51311L.10 - Extended Shielded Tip, ø 1.0, 40-50A 51311L.11 - Shielded Tip, ø 1.1, 50-60A 51311L.12 - Shielded Tip, ø 1.2, 60-70A 51311L.13 - Shielded Tip, ø 1.3, 70-80A 16 60504L - Extended Shield Cap, Hand For Compatibility Questions - please call us at 314-329-8553

Continue lendoRetaining Cap 2 Standoffs + Swirl Ring for PT-80 PT80 iPT80 IPT-80 Plasma Torch

60510 Retaining Cap for PT-80 PT80 PTM-80 iPT-80 iPT80 Plasma Torch *US SHIP*

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

PlasmaDyn© Plasma Cutter Replacement Parts Your US Based Expert in Plasma Cutters and Equipment for over 10 Years 　 1 Pc - UnShielded Plasma Cup Body Tecmo® PT-80 (iPT-80) Plasma Torch Includes: 1 x 60510 - UnShielded Retaining Cap (#7) For our OTHER iPT80 Parts CLICK THIS LINK!! Fits TECMO® PT-80 (iPt-80) Plasma Torches used on LONGEVITY® 62i, EVERLAST® 60S, PowerPlasma 70S, PowerCut 80s, HTP®, AHP® AND OTHER PLASMA CUTTERS WITH PT-80/iPT TORCH SYSTEM Note: these shielded parts should be used with 60511 (#11) & 60504 (#12) - see below We stock most PT-80 parts listed below - and ship same day - contact us for details Item # Part Number - Description 1 09800.42 - Cooling Tube 3 52558 - Electrode 4 60027 - Swirl ring 5 51310.09 - Contact Cutting, ø 0.9, 30-40A 6 51310.09 - Cutting, ø 1.0, 40-50A 51311.11 - Cutting, ø 1.1, 50-60A 51311.12 - Cutting, ø 1.2, 60-70A 51311.13 - Cutting, ø 1.3, 70-80A 7 60510 - Retaining Cap 8 60434 - Double Pointed Spacer (item 6 only) 9 51311S.10 - Contact Tip, ø 1.0, 40-50A 51311S.11 - Tip, ø 1.1, 50-60A 51311S.12 - Tip, ø 1.2, 60-70A 51311S.13 - Tip, ø 1.3, 70-80A 10 51311G.16 - Tip, Gouging, 80A 11 60511 - Shield Cup Body 12 60504 - Shield Cap, Hand 13 60508 - Shield Cap, Gouging 14 52558L - Extended Electrode 15 51311L.10 - Extended Shielded Tip, ø 1.0, 40-50A 51311L.11 - Shielded Tip, ø 1.1, 50-60A 51311L.12 - Shielded Tip, ø 1.2, 60-70A 51311L.13 - Shielded Tip, ø 1.3, 70-80A 16 60504L - Extended Shield Cap, Hand

Continue lendo60510 Retaining Cap for PT-80 PT80 PTM-80 iPT-80 iPT80 Plasma Torch *US SHIP*

PTM-60 CNC Plasma Machine Torch iPT60M PT60 Fits Everlast® PowerPlasma 50s – 62i

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

PlasmaDyn© Plasma Cutter Replacement Parts PTM-60 CNC Machine Torch For CNC Plasma Cutting Includes: 1 x PTM-60 Machine Torch, with FY0023 Central Connector Installed using Everlast® Pinout - 5m - ~16' long Includes Parts In Place Circuit & Pilot Arc Pins Fits plasma cutters utilizing Non-HF Arc Start If your Plasma Cutting Torch uses a spring loaded electrode its probably a Non-HF Arc Start - for example an S45 Trafimet is a Non-HF Arc Start Torch Note: our adapter kit can to enable you to ADAPT THIS TORCH to YOUR machineWe also sell this torch without the central connector HERE standard M16 connector, pilot arc wire and 2 pin on/off - and we can supply adapters for almost any machine

Continue lendoPTM-60 CNC Plasma Machine Torch iPT60M PT60 Fits Everlast® PowerPlasma 50s – 62i

iPT60 Plasma Hand Torch 20′ Fits Everlast PowerPlasma 50 52 60 62

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

PlasmaDyn© Plasma Cutter Replacement Parts iPT60 Hand Cutting Plasma Torch Includes: 1 x iPT60 Plasma Torch, 20 Foot, fits Everlast 50, 52, 60, 62i machines with FY0023 Central Connector Including: 50S, 60S, 52i, 62i, PowerPlasma 52I, PowerPlasma 62I others rated at 60A or less - utilizing Non-HF Arc Start Replacement Parts AVAILABLE HERE If your Plasma Cutting Torch uses a spring loaded electrode its probably a Non-HF Arc Start - for example an S45 Trafimet is a Non-HF Arc Start Torch We also sell this in a CNC Straight Machine Version Available HEREWe also stock the NEW X45 - Powermax Style Torch fits Many Everlast Plasma cutters - uses Hypertherm Consumables Available HERE

Continue lendoiPT60 Plasma Hand Torch 20′ Fits Everlast PowerPlasma 50 52 60 62

Plasma Hand Torch 20 Foot Fits Harbour Freight Titanium 45 & 65

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

PlasmaDyn© Plasma Cutter Replacement Parts P60i Hand Cutting Plasma Torch Fits Harbour Freight Titanium 45 & 65 Includes: P60i Plasma Torch, 20 Foot, fits Titanium 45 & Titanium 65 Replacement Parts AVAILABLE HERE We also sell the X45 Torch - fits Titanium 45 / 65 and uses Hypertherm Powermax 45 Parts - Hand and CNC Torches Available

Continue lendoPlasma Hand Torch 20 Foot Fits Harbour Freight Titanium 45 & 65