ERNI55 X 1/8″ TIG Nickel 55 10 lb Box Rods Blue Demon
ERNiFe-Cl is a filler metal used for TIG and MIG welding of cast iron. It is also used to repair the castings. The weld metal of ERNi-55 is harder than that of ERNi-99. A preheat interpass temperature of 350ºF minimum is recommended during welding, without which the weld and heat affected zones could develop cracks. AWS Specification *N.S. AWS Classification ERNiFe-Cl Typical Wire Chemistry C 0.05 Mn 0.25 Si 0.15 Fe 0.75 Ni 0.5 - 2.5 Typical Mechanical Properties (As Welded) Yield Strength, ksi 62 Tensile Strength, ksi 89 Elongation%, min 35 Available Diameters MIG and suggested Operating Range in Amps .035" 160 - 180 .045" 180 - 220 1.16" 210 - 250 Available Diameters TIG and suggested Operating Range in Amps .035" 160 - 180 .045" 180 - 220 1.16" 210 - 250 Recommended shielding gas 75% Argon + 25% Helium or 50% Argon + 50% HeliumERNiFe-CI (aka ERNI55) is a filler metal used for TIG and MIG welding of cast iron. It is also used to repair castings. The weld metal of ERNI55 is harder than that of ERNI99. A preheat and interpass temperature of 350 deg F minimum is recommended during welding, without which the weld and heat affected zones may develop cracks. Yield strength 62kpsiTensile strength 89kpsiElongation %, min 35 Product requires a shielding gas