HYPERTHERM POWERMAX 65 SYNC PLASMA CUTTER – 083343 200-600v 1/3ph

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

HYPERTHERM 65 SYNCThe next generation of Powermax65 system is unlike any plasma you've ever seen before. Featuring built-in intelligence and a revolutionary single-piece cartridge consumable, Powermax SYNC series helps to address skilled labor shortages with its simplified system operation. This new platform streamlines consumable inventory, lowers operation costs, and maximizes performance and productivity.Cut CapacityEliminate ErrorsSingle-piece color-coded cartridge eliminates consumable mix-ups, simplifies inventory management, and makes it easy to find the right cartridge consumable.SmartSYNC torch eliminates set-up errors by automatically setting the correct amperage, air pressure, and operating mode. Embedded technology tells you when the cartridge is completes used up and ready to be replaced.Minimize Operating CostsSimplified operation minimizes downtime, troubleshooting, waste, and training time.Advanced cartridge consumable provides up to twice the life for hand cutting and improved quality over life in mechanized setups compared to standard consumables.Cartridge date helps you track performance and analyze patterns helping you improve.Maximize PerformanceInterchangeable torches and application-specific cartridges allow you to tackle a range of jobs from cutting and gouging to flush cutting.Time-saving controls directly on the torch make it easy to adjust the amperage and change the cartridge without returning to the power supply.Single-piece cartridge allow you change-out consumable in seconds, instead of minutes.Enjoy Industry-Leading ReliabilityDesigned with the industry -leading reliability Powermax is know for.Engineered for rugged, industrial environments with SpringStart technology to ensure consistent starting and a more reliable torch.Warranty3 year warranty on the power supply1 year warranty on the torchSutton-Garten Co. is a 104 year old welding equipment distributor and a Hypertherm distributor and warranty repair facility.

Continue lendoHYPERTHERM POWERMAX 65 SYNC PLASMA CUTTER – 083343 200-600v 1/3ph

Hypertherm Powermax 65 Sync Plasma Cutter w/25ft Hand Torch (083343)

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

The Powermax65 SYNC is a next-generation professional grade air plasma system that dramatically simplifies system operation for cutting and gouging up to 20 mm (3/4″). Featuring automated system process set-up via advanced RFID-enabled SmartSYNC torches and a revolutionary single-piece cartridge consumable that provides trackable utilization data. The Powermax65 SYNC maximizes productivity through reductions in downtime, optimized cut quality performance and streamlined consumable inventory management. Sync systems contain an end-of-life consumable detection on the torch and the power source, letting the user know when to properly change the cartridge. The cartridge also retains its end-of-life status so it can not be re-used improperly.This particular model does NOT include a CPC port for automated hookup.Smart Sync Torch FeaturesInternal Cap Sensor - confirms the cartridge is installed correctly.Cartridge Reader - reads information on the RFID chip and relays it to the power source.LED - visual indicators on the handle show system ready state.7-Step Amperage LED - allows user to select one of seven preset values.Torch Lock Switch - allows consumable changes without turning off the power supply.Safety Trigger - protects the operator from accidental activation.Fiber Reinforced Handle - ensures long life operation and protection if dropped.Spring Strain Relief - protects the torch lead connection to the torch handle.Abrasion Resistant Torch Lead - protects the lead when being dragged over rough surfaces.End-of-Life detection is disabled when one of the following occur• A Fine Cut hand cutting cartridge is installed• The amperage is set below 40 amps for any type of cartridge• The output amperage is set below 55 amps and no communication between the cartridge and systemSYNC Features• Color Coded Single-Piece Cartridge Consumable (Hand, Mechanized/Stand Off, Gouging, and FlushCut/HyAccess)• Radio Frequency Identification (RFID)• Consumable Life Data TrackingQuick Specs• Input Voltage: 200-600V | 1/3 Phase | 50-60 Hz• Duty Cycle: 240-600V - 100% @ 45A | 200-240V - 50% @ 45A• Power Source Weight: 54 lbs• Dimensions: 19.7" L x 9.2" W x 17.9" H• Travel Speed: 20 ipm on 3/4" Metal• Recommended Air Pressure: 85 psi (5.9 bar) | 400 scfh (6.7 scfm)• Warranty: 3 years on Power Source | 1 year on TorchIncludes• Powermax 65 Sync Power Source• 75 Degree Smart Sync Torch with 25ft lead and 25ft work clamp• (2) 65A Drag and (1) 45A Drag Cartridge• Operator and Safety Manuals

Continue lendoHypertherm Powermax 65 Sync Plasma Cutter w/25ft Hand Torch (083343)

Hypertherm Powermax 65 SYNC Plasma Cutter 25 ft. 75 Degree Handheld Torch 083343

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

The Hypertherm Powermax 65 SYNC Plasma Cutter is a high-quality unit designed for welding and cutting tasks. Made by the reputable brand Hypertherm in the United States, this plasma cutter offers a 20/65 Amp input amperage and comes with a 25 ft. 75 Degree handheld torch. This specialized equipment is perfect for CNC, metalworking, and manufacturing businesses, providing precise and efficient cutting capabilities. With its reliable performance and durable construction, the Hypertherm Powermax 65 SYNC Plasma Cutter is a valuable addition to any welders duties.

Continue lendoHypertherm Powermax 65 SYNC Plasma Cutter 25 ft. 75 Degree Handheld Torch 083343