10 Cu Ft MC Acetylene Steel and 20 Cu Ft Steel Oxygen Cylinder Set DOT Approved

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

MC Acetylene & 20 cu ft Oxygen Steel Tank Set Acetylene and oxygen tank pair perfect for welding, soldering, brazing, heating, and cutting. This set includes one new 10 cubic foot steel 'MC' acetylene cylinder and one new 20 cubic foot steel oxygen cylinder. Acetylene tank includes a calcium silicate filler which is asbestos-free and is reinforced with alky-resistant glass fiber. Acetylene tank comes with a new installed CGA200 valve. Oxygen tank includes a new installed CGA540 valve. Both cylinders are DOT/TC approved with fresh certification dates within 180 days of shipment. Heavy-duty steel acetylene tank is painted a tough, rust-resistant Black, Red, or Grey Paint, while the heavy-duty steel oxygen tank is painted a tough, rust-stop green. Both cylinders ship empty. MC Acetylene Specifications Calcium silicate filler, asbestos-free, reinforced with alky-resistant glass fiber CGA200 Valve installed DOT- and TC-approved Steel Cylinder Dimensions: 4.125" Diameter x 15.5" Height* Tare Weight: 7.7 lbs. Acetylene Capacity: .68 lb. Thread Size: 3/8" NGT Valve body with fusible metal safety.Color may vary - Grey, Black, or Red Ships emptyPlease note: Acetylene cylinders require a shell inspection every 10 years. They also require an initial porous filler inspection at 5-20 years from the date of the manufacturer. This test is to be done no sooner than 5 years and no later than 20 years from the date of manufacturer. The Shell inspection is marked with an 'S' and the Porous Fill inspection is marked with an 'F'. 20 cu ft Oxygen Tank Specifications DOT- and TC-approved Certified within 12 months Steel Cylinder CGA540 Valve installed Dimensions: 5.25" Diameter x 18" Height* Tare Weight: 11 lbs. Service Pressure: 2234 PSI Test Pressure: 3365 PSI Ships empty *Note: due to differences with manufacturers, cylinder heights may vary by +/- several inches.Thank you for your support!Gas Cylinder Source

Continue lendo10 Cu Ft MC Acetylene Steel and 20 Cu Ft Steel Oxygen Cylinder Set DOT Approved

NEW 40 Cu Ft Acetylene B Steel Gas Cylinder Tank with CGA520 Valve DOT Approved

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

Pre-Installed CGA520 valve. New 40 cubic foot steel 'B' acetylene cylinder painted with tough, rust-resistant grey paint and made of durable steel. The perfect durable and affordable acetylene cylinder for all light industrial acetylene uses.

Continue lendoNEW 40 Cu Ft Acetylene B Steel Gas Cylinder Tank with CGA520 Valve DOT Approved

New 10 Cu Ft MC Acetylene Steel Gas Cylinder Tank with CGA200 Valve And Acetone

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

CGA200 Valve. CGA200 valve. DOT- and TC-approved. New 10 cubic foot steel 'MC' acetylene cylinder painted with tough, rust-resistant paint and made of durable steel. The perfect durable and affordable acetylene cylinder for all light industrial acetylene uses.

Continue lendoNew 10 Cu Ft MC Acetylene Steel Gas Cylinder Tank with CGA200 Valve And Acetone

New 20 Cu Ft Steel Argon Cylinder Tank with CGA580 Valve Welding Industrial

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

20 cu ft Steel Argon Tank New 20 cubic foot steel argon cylinder painted with tough, rust-stop paint and made of durable steel. The perfect durable and affordable argon cylinder for welding and industrial applications. CGA580 inert gas valve installed. DOT- and TC-approved. Fresh hydrostatic test approved within 12 months of shipment! Tank and CGA580 valve is compatible with all inert gases (nitrogen, argon, helium, and neon). Ships Empty. Steel Argon Cylinder Specifications CGA580 installed Capacity: 20 cu ft / 566 l Internal Volume: 220 cu in / 3.6 l Water Capacity: 7.9 lb / 3.6 kg Tare Weight 11 lbs. Applications: Welding, industrial, food/drink, manufacturing Rust inhibitor paint finish DOT- and TC-approved Certified within 12 months Steel Cylinder Dimensions: 5.25" Diameter x 18" Height (with valve) * Service Pressure: 2234 PSI Test Pressure: 3365 PSI Ships empty *Note: due to differences with manufacturers, cylinder heights may vary by +/- several inches.Color may vary depending on manufacturer i.e. grey or cranberryThank you for your support!Gas Cylinder Source

Continue lendoNew 20 Cu Ft Steel Argon Cylinder Tank with CGA580 Valve Welding Industrial

New 150 Cu Ft Steel Inert Gas Cylinder CGA580 Valve Helium Argon or Nitrogen

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

150 cu ft Steel Inert Tank For Argon, Helium, Nitrogen and CO2 Mix Gases One of our larger sized steel inert gas cylinders, this new 150 cubic foot steel tank comes with a pre-installed standard CGA580 valve manufactured with heavy-duty brass construction. The 150 cf steel tank is finished with a tough, rust-resistant cranberry color painted finish and comes with steel threaded collar and cap. Like the rest of our cylinders, this tank is made to last a lifetime of being filled, refilled, and requalified over and over. The durable and most affordable steel cylinder has a wide range of uses including beverage, welding, tire inflation, scientific, medical, food/drink, manufacturing, industrial and many other uses. DOT, ISO/UN, and TC approved with stampings. Fresh hydro test within 12 months of shipment! Cylinder and valve are compatible with all inert gases - nitrogen, argon, helium, Co2/Nitrogen Mix, and neon. All cylinders ship empty. Due to current nationwide helium shortages, it is recommended you locate a helium filler in your area prior to purchase. 150 cf Steel Inert Cylinder Specifications CGA580 installed Capacity: 150 cu ft Tare Weight 61 lbs Applications: beverage, welding, industrial, tire inflation, balloons, manufacturing, medical, scientific Gases: argon, helium, nitrogen, neon, CO2 mix Rust inhibitor cranberry color paint finish DOT- and TC-approved Certified within 12 months Steel Cylinder Dimensions: 8" Diameter x 51" Height (with valve) * Total Weight: Approximately 67 lbs. Service Pressure: 2216 PSI / 153 Bar Water Capacity 2650 cu in / 43.40 l Ships empty *Note: due to differences with manufacturers, cylinder heights may vary by +/- several inches.Thank you for your support! Gas Cylinder Source

Continue lendoNew 150 Cu Ft Steel Inert Gas Cylinder CGA580 Valve Helium Argon or Nitrogen

Helium Argon Nitrogen Transfill Adaptor CGA580 to CGA580 36″

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

High Quality Transfill System CGA580 to CGA580 with Bleed Valve Assembly Good assembly for transfilling welding gases from large to small cylinders, or filling small rental helium tanks. ARGON * HELIUM * NITROGEN *** Added BLEED VALVE easily purges residual Gas from transfill and allows for easy and SAFE disconnection of CGA580 and CGA580 connections. 36" 3000PSI Stainless Steel Braided PTFE Core HoseCGA 580 Brass Tank Connections on storage and CGA580 on the small cylinder fill side0-4000PSI Gauge for Cylinder / Transfill PressureExtra robust Bleed Valve for purging gas after transfill - Makes disconnecting cylinders MUCH easier without gas in the lineDrastically reduce your gas cost for small tanks. Buy your Gas in large tanks and fill your small CGA 580 tanks directly from the large tank. All parts are brass and stainless.One side is a CGA-580 (Large Tank) with a 4000 PSI pressure gauge and bleed valve, and the other side is CGA-580 that screws directly onto your small tank. $8.00 Shipping IMPORTANT ******* DETAILED INSTRUCTIONS INCLUDED - BE SURE TO READ AND FOLLOW ALL INSTRUCTIONS TO SAFELY TRANFILL INERT GASES - DO NOT USE OIL OR CONTAMINATE ANY PARTS TO BE USED IN GAS SERVICE - RISK OF SERIOUS INJURY IF DIRECTIONS NOT FOLLOWED PRECISELY.*****

Continue lendoHelium Argon Nitrogen Transfill Adaptor CGA580 to CGA580 36″

New 40 Cu Ft Steel Nitrogen Cylinder Tank CGA580 Valve Industrial Welding

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

40 cu ft Steel Nitrogen Tank This reliable new 40 cubic foot steel nitrogen cylinder is preinstalled with a standard CGA580 valve boasting heavy-duty brass construction and finished off with a tough, rust-resistant cranberry color painted finish. The perfectly durable and most affordable nitrogen cylinder, great for beverage, industrial, welding, and filling tires. DOT, ISO/UN, and TC approved. Fresh hydro test within 12 months of shipment! Cylinder and valve are compatible with all inert gases - nitrogen, argon, helium, and neon. Note: due to manufacturing variations, cylinder height may vary by as much as +/- several inches. All cylinders ship empty. Steel Nitrogen Cylinder Specifications CGA580 installed Capacity: 40 cu ft. / 1133 l Internal Volume: 476 cu in / 7.8 l Water Capacity: 17.2 lb. / 7.8 kg Tare Weight 29 lbs. Applications: Beverage, welding, industrial, tire inflation Rust inhibitor paint finish DOT- and TC-approved Certified within 12 months Steel Cylinder Dimensions: 7" Diameter x 18" Height (with valve)* Service Pressure: 2524 PSI / 174 Bar Test Pressure: 3365 PSI / 232 Bar Ships empty *Note: due to differences with manufacturers, cylinder heights may vary by +/- several inches.Thank you for your support!Gas Cylinder Source

Continue lendoNew 40 Cu Ft Steel Nitrogen Cylinder Tank CGA580 Valve Industrial Welding

New 20 Cu Ft Steel Nitrogen Cylinder with CGA580 Valve Industrial DOT Approved

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

20 cu ft Steel Nitrogen Tank New 20 cubic foot steel nitrogen cylinder painted with tough, rust-stop paint and made of durable steel. The perfect durable and affordable nitrogen cylinder for HVAC, industrial, and beverage applications. CGA580 inert gas valve is installed. Cylinder is ISO/UN stamped, and DOT- and TC-approved. Fresh hydrostatic test approved with stamping within 12 months of shipment! Steel Nitrogen Cylinder Specifications CGA580 installed Capacity: 20 cu ft / 566 l Internal Volume: 220 cu in / 3.6 l Water Capacity: 7.9 lb / 3.6 kg Tare Weight 11 lbs. Applications: HVAC, industrial, beverage Rust inhibitor paint finish DOT- and TC-approved Certified within 12 months Steel Cylinder Dimensions: 5.25" Diameter x 18" Height (with valve) Service Pressure: 2234 PSI Test Pressure: 3365 PSI Ships empty *Note: due to differences with manufacturers, cylinder heights may vary by +/- several inches.Color may vary depending on manufacturer i.e. grey or cranberry Thank you for your support!Gas Cylinder Source

Continue lendoNew 20 Cu Ft Steel Nitrogen Cylinder with CGA580 Valve Industrial DOT Approved

Helium Transfill Hose Adaptor CGA580 to CGA580 36″ w/ bleed valve

  • Autor do post:
  • Categoria do post:
  • Comentários do post:0 comentário

High Quality Transfill System CGA580 to CGA580 with Bleed Valve Assembly Good assembly for transfilling welding gases from large to small cylinders, or filling small rental helium tanks. ARGON * HELIUM * NITROGEN *** Added BLEED VALVE easily purges residual Gas from transfill and allows for easy and SAFE disconnection of CGA580 and CGA580 connections. 36" 3000PSI Stainless Steel Braided PTFE Core HoseCGA 580 Brass Tank Connections on storage and CGA580 on the small cylinder fill side0-4000PSI Gauge for Cylinder / Transfill PressureExtra robust Bleed Valve for purging gas after transfill - Makes disconnecting cylinders MUCH easier without gas in the lineDrastically reduce your gas cost for small tanks. Buy your Gas in large tanks and fill your small CGA 580 tanks directly from the large tank. All parts are brass and stainless.One side is a CGA-580 (Large Tank) with a 4000 PSI pressure gauge and bleed valve, and the other side is CGA-580 that screws directly onto your small tank.

Continue lendoHelium Transfill Hose Adaptor CGA580 to CGA580 36″ w/ bleed valve